What Is the part number for the 3 cell 31whr battery? Thx

How to tell what keyboard controller and trackpoint, trackpad controller this series use? Thx

How to tell what keyboard controller and trackpoint, trackpad controller this series use? Thx

How to downgrade ec ? Thx

Has anyone got the vbios/gop driver working for tianocore?

What thinkpad model uses intel ivy bridge hd4000 and has screen resolution of 2560x1600? Thx

does ide dvd caddy to ide 3.5 exist? thx

Thanks a lot! I've disconnected these 4 pins in a hard drive. Unfortunately, BIOS couldn't detect this drive at all. So I connected pins 27 to 59 and 53 to 60 (in the other side of TP "plug"), as it was written in some German web page. It works! Another problem: Why this laptop slows down when dock...

but the manufacturer site does not say which pin is in or out. (hence the pin 47 or 48 problem.. but I don't want to bend two of them) they just say put the jumper in for Master..

convert to dvorak keyboard by prying off keys?

is it possible

thanks

Harryc wrote:What OS is this and what IBM utility are you using?

win98se from restore partition

SSClient/Tpad 4.50

thanks

How to prevent sleep when lid is closed for win98?

The IBM HelpCenter server is temporarily unavailable?

How to solve this problem?

Can anyone tell me for a drive with the newer reversed master.. ie: no jumper for master.. vs the old ones (jumper for master), which pin, with photo it is?

thanks

What program can I use to open the IMD file?

Can anyone tell me what program to open the IMD file?

Is there any way to bypass this check by editing some files?

"your bios is not compatible with this product recovery cd"

I have a 600e with

32mb low density (4 pcs) - built in

64mb low density (8 pcs total) - added
64mb high density (4 pcs total) - added

I want to expand my memory, so I have to remove one of them but which 64mb ram should I keep?

thanks

Arrgh, so I think the 12v also caused the included lithium battery to NOT charge. I thought it was bad and throw it away...

I think it needed 16V to "enable" the charge curcit..

oh well, didn't know better.

If you use any cygwin (linux) apps in Windows Fundamentals, it won't work because the "NUL or NULL" device does not exist.

Do you have a part number? I have a IBM 12v, but the system shuts off randomly I think thats the reason.

thanks

What is the voltage on the label of an 600E AC Adapter?

Can anyone who have the original read it for me?

thanks

What does the 27 ohm resisters do?

Has anyone thought of replacing the charging board (ie: from a non-problem battery, like 570..?) to fix the 'balance voltage' problem? ie: which chip is the buggy one? AN8165NFHP BDE3AB etc? It seems no one knows about the other chips does beside the EEPROM.. I am trying to find out what pins 7,8,9,...

disable floppy in bios in tp760?

Is it possible?

Thanks, I have finally got some time to try it but with 22 ohm resistors (could not find 27 ohm resistors yet), right now it says 'unknown device' .. Will get 27 ohm to see if thats the problem...

600 port replicator pinout? (for USB)

Does anyone know/have the info? thanks

Its working I think.. two years later and I think the solution is this: http://lists.mplayerhq.hu/pipermail/mplayer-users/2006-May/060473.html You won't believe it. The thing that helped was changing the card mode on the primary monitor from 100Hz to 85Hz! How can that be?... How come I can't have t...

Can you tell me what program you are using to do the 2D tests? I want to know which driver to use (2d only)

TP 600X 2D @47

I have an 600E (I want to post my video score too, 2.5MB SGRAM vs 4MB SGRAM)

Are you the junklemike that made the Palm Tungsten battery 4000mah mods?