Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
how to reenable Lenovo EISA paritition on boot after install
how to reenable Lenovo EISA paritition on boot after install
i installed OSX and now the blue thinkpad button isn't working. it always boots into osx. how can i fix this? do i boot off another disc that allows me to use fdisk and set an active partition?
I downloaded the RNR4.0 repair program from here:
http://www-307.ibm.com/pc/support/site. ... MIGR-54483
I had to burn it to CD since I don't have a floppy in my X60. Problem is that it complains that I can't write to the disk on startup (of course), and it bombs out. Does anyone know what the right parameter is to use in order to fix this? Or, am I using the wrong thing entirely??
I basically want my blue ThinkVantage button to work again on startup by being able to use it to go to the Recovery Partition.
http://www-307.ibm.com/pc/support/site. ... MIGR-54483
I had to burn it to CD since I don't have a floppy in my X60. Problem is that it complains that I can't write to the disk on startup (of course), and it bombs out. Does anyone know what the right parameter is to use in order to fix this? Or, am I using the wrong thing entirely??
I basically want my blue ThinkVantage button to work again on startup by being able to use it to go to the Recovery Partition.
Problem SOLVED!
I used Nero and made a bootable ISO from the floppy image (I used another computer to write the floppy).
I also copied the contents of the floppy to a flash drive.\
I booted OFF the new bootable CD-ROM in the docking station and then put the flash drive in the X60 USB port.
I hit control-c to abort the autoexec.bat program after it booted up. This dropped me to the DOS prompt. I changed to the USB drive (drive C:) and ran the DOE.EXE program which then was able to start up and rewrite the master boot record to the Thinkpad.
The reason you have to run the files off a usb drive is that the program needs write access (something you obviously can't do w/ a CD-ROM drive). I suppose I could have made a bootable USB flash drive, but I didn't want to go through the extra hoops necessary to do that.
So...problem FIXED!
Now, if only I could figure out how to boot the OS X partition from my Vista one...I have chain0, but it's not booting....
I also copied the contents of the floppy to a flash drive.\
I booted OFF the new bootable CD-ROM in the docking station and then put the flash drive in the X60 USB port.
I hit control-c to abort the autoexec.bat program after it booted up. This dropped me to the DOS prompt. I changed to the USB drive (drive C:) and ran the DOE.EXE program which then was able to start up and rewrite the master boot record to the Thinkpad.
The reason you have to run the files off a usb drive is that the program needs write access (something you obviously can't do w/ a CD-ROM drive). I suppose I could have made a bootable USB flash drive, but I didn't want to go through the extra hoops necessary to do that.
So...problem FIXED!
Now, if only I could figure out how to boot the OS X partition from my Vista one...I have chain0, but it's not booting....
Re: Problem SOLVED!
Download and install EasyBCD for Vista:pupster wrote:Now, if only I could figure out how to boot the OS X partition from my Vista one...I have chain0, but it's not booting....
http://neosmart.net/dl.php?id=1
Then, with EasyBCD you will easily configure the bootloader in order to have Vista/Mac OS X dual boot.
Regards
Neb
OS X:
CoreDuo T2600 (2.16 GHz)
ATi Radeon Mobility X1400
SoundMAX Integrated Digital HD Audio
Intel Pro/1000PL
Intel PRO/Wireless 3945ABG
PCMCIA TI PCI-1510
Bluetooth
CoreDuo T2600 (2.16 GHz)
ATi Radeon Mobility X1400
SoundMAX Integrated Digital HD Audio
Intel Pro/1000PL
Intel PRO/Wireless 3945ABG
PCMCIA TI PCI-1510
Bluetooth
-
- Similar Topics
- Replies
- Views
- Last post
-
-
T480 screen shuts off after a few seconds to a minute after starting to use it.
by FranklinHawkings » Wed Oct 22, 2025 5:26 pm » in ThinkPad T430-T495 / T530-T590 Series - 13 Replies
- 29872 Views
-
Last post by RealBlackStuff
Sat Nov 01, 2025 12:09 am
-
-
-
X1 tablet gen 3 won't boot after SSD replacement
by babblefish » Thu Feb 19, 2026 10:22 pm » in ThinkPad X1 / X1-Carbon / X1-Extreme and later Series - 7 Replies
- 4433 Views
-
Last post by babblefish
Fri Feb 20, 2026 7:44 am
-
-
-
W520 doesn't boot after critical battery error...
by salzrat » Mon Mar 16, 2026 12:18 pm » in ThinkPad W500/W510/W520 and W700/W701 Series - 12 Replies
- 5146 Views
-
Last post by RealBlackStuff
Fri Mar 20, 2026 1:32 pm
-
-
-
Can I restore T14 Gen2 after reset using backup of SSD?
by Thinkpad2024 » Sat Nov 01, 2025 9:33 pm » in Thinkpad T14/T15/T16 - 4 Replies
- 9375 Views
-
Last post by axur-delmeria
Sun Nov 02, 2025 2:30 pm
-
Who is online
Users browsing this forum: No registered users and 32 guests



