Page 1 of 1
Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Aug 22, 2016 6:12 pm
by glossywhite
Just found this driver for R500 2714-AAG, for the AuthenTec AES2810 fingerprint sensor, and it works FLAWLESSLY for "Windows Hello" fingerprint login:
http://www.dell.com/support/home/us/en/ ... erId=DFDJ9
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Aug 22, 2016 6:46 pm
by TPFanatic
Nice find! I'll try this out on my T500. From Dell's site, huh. Too bad LeNOvo can't be bothered to support anything older than 3 years....
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Aug 22, 2016 7:26 pm
by glossywhite
TPFanatic wrote:Nice find! I'll try this out on my T500. From Dell's site, huh. Too bad LeNOvo can't be bothered to support anything older than 3 years....
Yep, well it works a treat, let me tell you
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Aug 22, 2016 8:02 pm
by TPFanatic
It worked for me, thanks for sharing.
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Aug 22, 2016 8:55 pm
by glossywhite
TPFanatic wrote:It worked for me, thanks for sharing.
You are welcome, anytime
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Sun Jan 26, 2020 5:56 pm
by Dicedemon
Still works in 2020!
Was pulling my hair out trying to get my fingerprint reader working in Win 10 on my X200
NOTHING else on the internet worked, many thanks for this!!
Todd
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Sat Sep 05, 2020 1:43 pm
by jatoncel
Muchas gracias...!
al día de hoy (septiembre 2020), el driver funciona perfectamente en mi Thinkpad T400.
Thank...!
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Sun Jan 02, 2022 11:30 pm
by TryinToHelp
I just got the fingerprint driver to install on my Lenovo T400 6474-P1U. It has Windows 10 x64 21H2. I used the installer lfs33250w764.exe from Lenovo. Before launching it, right-click this file --> Properties --> 'Compatibility' tab --> in the 'Compatibility mode' tab place a check in the 'Run this program in compatibility mode for:' and select 'Windows 7' from the drop-down. Now in the 'Settings' section place a check in the 'Run this program as an administrator' and click 'OK'
Now when you launch that 'lfs33250w764.exe' the installer will run and install as it should. The driver installed for me and I no longer have an unknown device in my Device Manager.
The driver installs correctly however I still cannot get 'Windows Hello Fingerprint' to recognize it as a compatible fingerprint scanner. It says "We couldn't find a fingerprint scanner compatible with Windows Hello Fingerprint". Am I missing something?
Re: Authentec AES2810 driver for Windows 10 & Windows Hello
Posted: Mon Jan 03, 2022 2:15 pm
by kfzhu1229
TryinToHelp wrote: ↑Sun Jan 02, 2022 11:30 pm
The driver installs correctly however I still cannot get 'Windows Hello Fingerprint' to recognize it as a compatible fingerprint scanner. It says "We couldn't find a fingerprint scanner compatible with Windows Hello Fingerprint". Am I missing something?
This indicates the driver is too old to work properly with Windows Hello. I am running into the same problem with the HP drivers for a Compaq 6730b also with this sensor.
Use that Dell driver instead, as it's meant for a Latitude E5430, which is a laptop Dell officially supported Windows 10 on and hence has official Windows 10 driver
And somehow I cannot open that link, so here's another link to the same page:
https://www.dell.com/support/home/en-ca ... tude-e5430