Page 1 of 1
ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Sat Apr 06, 2019 9:36 pm
by draco2527
Had to get my MOBO replaced, followed by a re-image. Lost the following file for the pantone:
c:\ProgramData\X-Rite\ECCM-2\ECCM2SensorsData.dat
If you have a P50 or P51 with a working Pantone. Would you mind making a copy of the DAT file and sending it to me?
It would be greatly appreciated.
PS: c:\programdata might not be visible, change it in folder view or type c:\programdata >> Enter, in file explorer to search the directory.
Thank you!
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Sat May 11, 2019 1:32 pm
by w0qj
So what LCD screen are you using for your P51?
For the 4k LCD P51 model, there's a X-Rite calibration profile that you can download as per the 2nd URL link below:
www.notebookcheck.net/Lenovo-ThinkPad-P ... 212.0.html
www.notebookcheck.net/uploads/tx_nbc2/B156ZAN02_1.icm
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Sat Jul 06, 2019 12:58 pm
by rrecord
Here are the files:
x-rite eccm full folder:
https://we.tl/t-zHr8rH8XD5
x-rite pantone folder for missing tables:
https://we.tl/t-t6W0HVBN8p
I had a similar issue, boght a p51 mainboard, then p51 palmrest and other parts, and had this issue with eccm2sensordat. I did replace all files like copy paste and ran the sensor replacement utility, then calibration and all worked well. After succes I saw some new logs in eccm folder that showed it actually saves the configuration in eeprom memory so next time you reinstall, probably you are safe without any back-up. This issue may only appear when one of the following: changed sensor, changed matherboard or more or less changed LCD. I had everything changed so there i go
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Tue Jul 16, 2019 3:53 am
by tripman
I have similar isue with w541 Can you reupload files please?
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Mon Oct 28, 2019 4:46 pm
by jm26
Hi, Can you be so kind and share once again these files?
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Mon Nov 18, 2019 12:02 am
by draco2527
Still haven't fixed the issue and I missed the link he posted (as mentioned above, it is no longer valid)
Searching high/low and not able to find the file.
Unfortunately Lenovo thinks that sending a replacement LCD is the answer to this problem. (HINT: IT IS NOT!)
Reached out to rrecord...
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Mon Nov 18, 2019 3:48 am
by RealBlackStuff
I happened to have downloaded those files.
Uploaded them (as a directory with 2 files) to the same outfit,.
THIS LINK IS VALID ONLY FOR 1 WEEK from today:
https://we.tl/t-02j2yPkQmq
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Mon Nov 18, 2019 11:50 am
by draco2527
I grabbed them, will play with it tonight. From what I unzipped, they might not be the correct files.
I believe they should be c:\ProgramData\X-Rite\ECCM-2\ECCM2SensorsData.dat
The error specifically states to "if you have a backup copy of the file, please restore it. If you do not have a backup copy or it doesn't fix this problem, please report this error to technical support."
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Mon Nov 18, 2019 12:17 pm
by RealBlackStuff
I don't have such a machine.
The directory name:
P50-Color-Profile is my own and contains these 2 files:
F7HH2-156WF6 #2 2016-10-07 18-46 S XYZLUT+MTX RGB LED.icc
You could perhaps shorten this to: LED.icc
The .7z file contains only: LQ156D1JW05.icm
Where you put those files is none of my business
Didn't see any .dat file
Alternative:
viewtopic.php?f=70&t=129350
Maybe helpful?
https://sourceforge.net/p/dispcalgui/di ... /1e8dfd1c/
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Fri Nov 29, 2019 8:30 am
by levin92
rrecord wrote: ↑Sat Jul 06, 2019 12:58 pm
Here are the files:
x-rite eccm full folder:
https://we.tl/t-zHr8rH8XD5
x-rite pantone folder for missing tables:
https://we.tl/t-t6W0HVBN8p
I had a similar issue, boght a p51 mainboard, then p51 palmrest and other parts, and had this issue with eccm2sensordat. I did replace all files like copy paste and ran the sensor replacement utility, then calibration and all worked well. After succes I saw some new logs in eccm folder that showed it actually saves the configuration in eeprom memory so next time you reinstall, probably you are safe without any back-up. This issue may only appear when one of the following: changed sensor, changed matherboard or more or less changed LCD. I had everything changed so there i go
Sorry. Can you reload the two folders that you have uploaded? I am also having problems with the color sensor. If possible you can email me "
sonthuy.gtvt@gmail.com". Thank you verry much!
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Tue Dec 03, 2019 1:43 am
by draco2527
Still need the files from the following folders:
x-rite eccm full folder
x-rite pantone folder for missing tables
PITA with this Pantone...
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Tue Apr 27, 2021 6:20 pm
by atagunov
draco2527 wrote: ↑Sat Apr 06, 2019 9:36 pm
c:\ProgramData\X-Rite\ECCM-2\ECCM2SensorsData.dat
Hey, what on dear Earth is this file? I got a W530 with colour sensor without the file, got a pal to get the file from. But what does it contain?? What does HMM suggest replacing the display panel if it has been lost???
As a separate exercise I'll need to figure out what software can use this sensor on W10
Heh, if this guy is right there is not much lost due to non-working sensor:
https://blogs.gnome.org/hughsie/2017/08 ... nkpad-p70/
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Sun May 19, 2024 6:07 pm
by Someguy12121
Does anyone have the C:\ProgramData\X-Rite\ECCM-2\ECCM2SensorData.dat file for a P71? I am currently getting error 23 while reading. I have already tried a full uninstall and reinstall of the calibration program.
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Fri Nov 21, 2025 5:20 am
by spccb
rrecord wrote: ↑Sat Jul 06, 2019 12:58 pm
Here are the files:
x-rite eccm full folder:
https://we.tl/t-zHr8rH8XD5
x-rite pantone folder for missing tables:
https://we.tl/t-t6W0HVBN8p
I had a similar issue, boght a p51 mainboard, then p51 palmrest and other parts, and had this issue with eccm2sensordat. I did replace all files like copy paste and ran the sensor replacement utility, then calibration and all worked well. After succes I saw some new logs in eccm folder that showed it actually saves the configuration in eeprom memory so next time you reinstall, probably you are safe without any back-up. This issue may only appear when one of the following: changed sensor, changed matherboard or more or less changed LCD. I had everything changed so there i go
Hi ! Sorry for the excavation of this post, but I'm looking for the file ECCM2SensorData.dat (for a P51 in FHD but I can mod the file if it's for 4k). I got the same problem, after installing from scratch the sensor, the replacement utility doesn't work and says the file is missing.
If someone has this file it will be very appreciated, i did not find any link to download it but in Chinese forum where we can't access.
Thanks y'all !
Re: ECCM2SensorsData.dat needed from Pantone P50 or P51
Posted: Tue Dec 09, 2025 2:02 am
by draco2527
Ironically, I never got it to work properly under WIN10 unless the file was present.
I just tried it under WIN11, after installing the WIN10 drivers and software for the Pantone and everything works GREAT! As in even the calibration works (something that was a hit or miss under WIN10 when the Pantone was working).
No idea why it is working without issues under WIN11...