IBM ThinkPad October 02, 2002 Video Features(Mob-128) for Windows 95/98/Me Version M6.73.2-020907m-005868C ====================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Package Does ---------------------- This package provides the video driver for Windows 95/98/Me users. The video driver enables or updates the video function of the following ThinkPad system: - ThinkPad A20p - ThinkPad A21p - ThinkPad A22p - ThinkPad A22m (Model 2628-Sxx only) To determine if you should update the display driver, refer to the "Summary of Changes" section. To update the display driver, refer to the "Installation Instructions" section. Released Versions ----------------- Version M6.30.4 -T01 Initial release. Support for ThinkPad A20p. Version M6.30.9 -T01 Message correction. Version M6.30.12-T01 Message correction. Version M6.31.27-T01 Windows Me support. Version M6.31.43-T02 Support for ThinkPad A21p. Version M6.31.74-T01 Support for ThinkPad A22p, A22m(2628-Sxx only). Version M6.31.76-T01 Problem fix. Version M6.31.80-T01 Problem fix. Version M6.73.2-020907m-005868C Problem fix. Summary of Changes ------------------ Where: Package version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing function -(New) Support for ThinkPad A20p. -(Fix) Message correction. -(Fix) Message correction. -(New) Support for Windows Me. -(New) Support for DirectX7. -(New) Support for ThinkPad A21p. -(New) Support for UXGA(1600x1200) LCD panel. -(New) Support for ThinkPad A22p. -(New) Support for ThinkPad A22m(Model 2628-Sxx only). -(Fix) Mpeg2 capture is not supported for PAL input. To support Mpeg2 size, DX8 runtime modules are required. Depend on the capture application, supported capture size and capture format may be limited. -(Fix) Problem in capture function. -(Fix) Desktop image does not fit the CRT screen when scaling image to panel size in simultaneous display mode. NOTE: For Windows 98/95, make sure that DirectX7 or DirectX8 runtime modules have installed into the system before installing this driver. DirectX runtime modules are available on the Microsoft Web site. Installation instructions for Windows 95 OSR2.x/98/Me -------------------------------------------------- 1. Start Windows 95 OSR2.x, Windows 98, or Windows Me. 2. Extract the drivers to the hard disk drive. 3. Click Start then click Run. 4. In the Run dialog window, type C:\DRIVERS\W9X\DISPLAY\ATISETUP.EXE, Click OK to start the installation process. If you extracted the files to a different location, specify that location instead. 5. Select ATI Easy Install. 6. When the Welcome window appears, click the Next button. 7. At the Software Licence Agreement screen, if you agree, click Yes. 8. Select Express: Recommended. 9. At the Setup Complete screen, select Yes, I want to restart my computer now. 10. Click Finish, then reboot the system. Installation instructions for Windows 95 OSR0 and OSR1 ------------------------------------------------------ Since the Setup.exe, InstallShield does not work with Windows 95 OSR0/1 do the following Clean installation 1. Start Windows 95. 2. Extract the drivers to the hard disk drive. 3. Click Start, select Settings, then click Control Panel. 4. Double-click the System icon. 5. Click the Device Manager tab. 6. Remove Standard Display Adapter (VGA) under Display adapters. 7. At the Confirm Device Removal window, click OK. 8. At the Restart confirmation message window, click NO. 9. Remove PCI VGA-Compatoble Display Adapter under Other Devices. 10. At the Confirm Device Removal window, click OK. 11. At the PCI VGA-Compatible Display Adapter Has a ROM window, click Test. 12. Shutdown and restart the system. 13. When the system starts, the New Hardware Found window appears. Place a check mark in Driver from disk provided by hardware manufacturer, and click OK. 14. Specify atidrive directory where the diver files were extracted, and click OK. 15. At the System Settings Change window, click YES to restart the system. Determining which version is installed -------------------------------------- Windows 98/Me 1. Start Windows 98/Me. 2. Click Start, select Settings, then click Control Panel. 3. Double-click the Display icon. 4. Click the Setting tab. 5. Click the Advanced (Properties) button. 6. Click the Options tab. The build is part of the version number. Windows 95 1. Start Windows 95. 2. Click Start, select Settings, then click Control Panel. 3. Double-click the Display icon. 4. Click the Settings tab. 5. Click the Options tab. The build is part of the version number. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Windows is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.